FEATURES OF SHAPE CHANGE OF RING-SHAPED FORCE ELEMENTS MADE OF TiNi ALLOY AFTER ACTIVE DEFORMATION

Authors

DOI:

https://doi.org/10.59957/jctm.v60.i4.2025.12

Keywords:

shape memory alloys, two-way shape memory effect, TiNi, ring-shaped force elements

Abstract

The paper considers the features of shape change of ring-shaped force elements made of TiNi alloy during thermocycling. Non-monotonic deformation characteristics were obtained. The decrease in the sample shape during thermocycling is associated with incomplete martensitic transformation of the material due to temperature shifts during training. Holding of the sample in the martensitic state can lead to stabilization of the martensitic transformations’ temperatures and an increase in the proportion of martensite in the ring material. It can increase the shape change of the ring.

Author Biographies

Alexey Melnikov, Peter the Great St. Petersburg Polytechnic University

Institute of Machinery, Materials and Transport, Higher School of Mechanical Engineering, Master student

Tomash Nkungu, Peter the Great St. Petersburg Polytechnic University

Institute of Machinery, Materials and Transport, Higher School of Mechanical Engineering, Master student

Maxim Sokolov, Peter the Great St. Petersburg Polytechnic University

Institute of Machinery, Materials and Transport, Higher School of Mechanical Engineering, Master student

Alexandr Tupikov, Peter the Great St. Petersburg Polytechnic University

Institute of Machinery, Materials and Transport, Higher School of Mechanical Engineering, Postgraduate, Assistant

Eugeny Ostropiko, St. Petersburg State University

Mathematics and Mechanics Faculty, Department of Theory of Elasticity, PhD, Associated Professor

Elisey Khlopkov, Peter the Great St. Petersburg Polytechnic University

Institute of Machinery, Materials and Transport, Higher School of Mechanical Engineering, PhD, Associated Professor

References

J.W. Sohn, J.S. Ruth, D.-G. Yuk, S.-B. Choi, Application of shape memory alloy actuators to vibration and motion control of structural systems: a review, Appl. Sci. 13, 2023, 995, https://doi.org/10.3390/app13020995.

G. Costanza, M. E. Tata, Shape memory alloys for aerospace, recent developments, and new applications: a short review, Materials, 13, 2020, 1856, https://doi.org/10.3390/ma13081856.

S. Pulnev, V. Nikolaev, A. Priadko, A. Rogov, I. Vahhi, Actuators and drivers based on CuAlNi shape memory single crystals, J. Mater. Eng. Perform., 20, 4-5, 2015, 497-499, https://doi.org/10.1007/s11665-011-9915-2.

E.A. Khlopkov, A.A. Dmitrievskiy, S.P. Pomytkin, S.A. Lyubomudrov, T.A. Makarova, G.A. Volkov, A.S. Turzakov, Y.N. Vyunenko, Influence of the mechanical load on the operating temperature of ring-shaped bundle force elements, Russ. Eng. Res., 41, 2, 2021, 162-165, https://doi.org/10.3103/S1068798X2102009X.

X. Li, R. Gao, A portable modular vaccine injection system actuated by shape memory alloy, Mech. Adv. Mater. Struct., 31, 12, 2024, pp. 2545–2561, doi: 10.1080/15376494.2022.2161680.

N. Resnina, S. Belyaev, A. Bazlov, I. Ponikarova, A. Sibirev, A. Ivanov, R. Bikbaev, I. Strochko, Palladium-free multicomponent high temperature shape memory alloys, Int. J. of Eng. Sci., 197, 2024, 104027, https://doi.org/10.1016/j.ijengsci.2024.104027.

N. Resnina, I.A. Palani, S. Belyaev, S. Singh, A. Kumar, R. Bikbaev, A. Sahu, Functional properties of the multilayer NiTi alloy produced by wire arc additive manufacturing, Shape Memory and Superelasticity, 8, 1, 2022, 5–15, https://doi.org/10.1007/s40830-022-00359-0.

Y.I. Chumlyakov, I.V. Kireeva, Z.V. Pobedennaya, L.P. Yakovleva, A.V. Vyrodova, I.V. Kuksgauzen, Orientation dependence of shape memory effect and superelasticity in (TiZrHf)50Ni25Co10Cu15 high-entropy alloy single crystals, Shape Memory and Superelasticity, 9, 2, 2023, 300-312, https://doi.org/10.1007/s40830-022-00411-z.

M. Derkach, D. Gunderov, N. Tabachkova, V. Cheverikin, E. Zolotukhin, S. Prokoshkin, V. Brailovski, V. Sheremetyev, Effect of low and high temperature ECAP modes on the microstructure, mechanical properties and functional fatigue behavior of Ti-Zr-Nb alloy for biomedical applications, J. Alloys Compd., 976, 2024, 173147, https://doi.org/10.1016/j.jallcom.2023.173147.

M. Kaftaranova, V. Hodorenko, S. Anikeev, N. Artyukhova, A.V. Shabalina, V. Gunther, Investigation of the effect of copper addition on physical and mechanical properties of TiNi-Cu porous alloy, Metals, 12, 2022, 1696, https://doi.org/10.3390/met12101696.

N.N. Belousov, E.A. Khlopkov, M.V. Yanchenko, Y.N. Vyunenko, Specific features in mechanical behavior of ring-shaped force drives operating in the two-way shape memory effect regime, Tech. Phys., 66, 2, 2021, 250-254, https://doi.org/10.1134/S1063784221020055.

V. Chigirinsky, A. Naizabekov, S. Lezhnev, S. Kuzmin, E. Panin, A. Tolkushkin, I. Volokitina, R. Yordanova, M. Knapinski, Effect of the limiting deformation zone under conditions of asymmetric loading during rolling of medium thickness strips, J. Chem. Tech. Met., 59, 4, 2024, 993-1002, https://doi.org/10.59957/jctm.v59.i4.2024.30.

E. Ostropiko, S. Krivosheev, S. Magazinov, E. Khlopkov, Features of functional behavior of TiNi shape memory alloy after uniaxial high speed magnetic pulse tension, Mech. Adv. Mater. Struct., 2024, 1–7, https://doi.org/10.1080/15376494.2024.2348648.

R. Lahoz, J.A. Puertolas, Training and two-way shape memory in NiTi alloys: influence on thermal parameters, J. Alloys Compd., 381, 2004, 130-136, https://doi.org/10.1016/j.jallcom.2004.03.080.

J. Perkins, R.O. Sponholz, Stress-induced martensitic transformation cycling and two-way shape memory training in Cu-Zn-Al alloys, Metall. Trans. A, 1984, 15, 2, 1984, 313-321, https://doi.org/10.1007/BF02645117.

Y. Liu, Y. Liu, J. Van Humbeeck, Two-way shape memory effect developed by martensite deformation in NiTi, Acta Mater., 47, 1, 1998, 199-209, https://doi.org/10.1016/S1359-6454(98)00325-5.

A. Falvo, F.M. Furgiuele, C. Maletta, Functional behaviour of a NiTi-welded joint: Two-way shape memory effect, Mater. Sci. Eng. A, 481-482, 1-2 C, 2008, 647-650, https://doi.org/10.1016/j.msea.2006.11.178.

E.A. Khlopkov, N.N. Belousov, T.A. Makarova, Ya.Yu. Brovkina, A.O. Mikhailov, Yu.N. Vyunenko, The influence of the thermomechanical conditions and the geometric parameters of TiNi alloy force elements on the deformation processes of two-way memory effects, IOP Conf. Ser.: Mater. Sci. Eng., 656, 2019, 012025, https://doi.org/10.1088/1757-899X/656/1/012025.

E.A. Khlopkov, S.P. Pomytkin, S.A. Lyubomudrov, T.A. Makarova, M.V. Yanchenko, Deformation behaviour of the TiNi alloy ring-shaped bundle force elements, Metalloobrabotka, 1, 2021, 26–32, https://doi.org/10.25960/mo.2021.1.26, (in Russian).

N.N. Belousov, E.A. Khlopkov, M.V. Yanchenko, G.A. Volkov, Y.N. Vyunenko, Deformation characteristics of ring-shaped bundle force elements made of the tini alloy determined by reversible shape memory, Physics and High Pressure Technology, 32, 3, 2022, 95-107, (in Russian).

A.V. Sibirev, S.P. Belyaev, N.N. Resnina, Influence of the maximum thermal cycle temperature on martensitic transformations in the TiNi alloy, Proceedings Petersburg's Readings on Strength of Materials, St. Petersburg, Russia, 2016, S.-Peterb. Gos. Politekh. Univ., St. Petersburg, 2016, 345-347, (in Russian).

Downloads

Published

2025-07-11

Issue

Vol. 60 No. 4 (2025)

Section

Articles

License

Copyright (c) 2025 Journal of Chemical Technology and Metallurgy

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.