ORE ENRICHMENT WASTE AS RAW MATERIAL FOR HEAVY METAL SORBENTS
DOI:
https://doi.org/10.59957/jctm.v60.i4.2025.14Keywords:
technogenic raw materials, ore enrichment wastes, silicophosphates, sorbents, structural analysisAbstract
The study considered ore enrichment waste from the Ashiktas, Akbakai, and Maikain deposits to create sorbents based on silicophosphates. X-ray phase and electron probe elemental analysis were carried out, which confirmed the presence of silicon, aluminosilicate, and other valuable components suitable for the sorbents synthesis. The optimal synthesis temperature (600°C) contributes to the sorbents' porous structure development and a sorption capacity increase concerning Ni2+ ions, allowing them to be used to purify industrial wastewater from heavy metals, which was proven using zeta potential measurements and SEM images.
References
B. M. Aumeier, A. Georgi, N. Saeidi, G. Sigmund, Is sorption technology fit for the removal of persistent and mobile organic contaminants from water? Science of The Total Environment, 2023, 880, 163343.
D. Andraka, K. Ospanov, M. Myrzakhmetov, Current state of communal sewage treatment in the republic of kazakhstan, Journal of Ecological Engineering, 2015, 16, 101–109.
I. A. Arkanova, K. A. Kuznetsova, Characteristic Features of the Water-Treatment System Design for Outdoor Pools in the Urals, Procedia Engineering, 2016, 150, 2352–2357.
N.A. Ibragimova, O.V. Esyrev, Z. R. Zhantuarova, Z. M. Biyasheva, Comprehensive Assessment of Waste Water Pollution Rate in Almaty City, Kazakhstan, International Journal of Environmental Science and Development, 2016, 7, 420–424.
K. Godlewska, P. Stepnowski, M. Paszkiewicz, Carbon nanotubes, activated carbon and Oasis HLB as sorbents of passive samplers for extraction of selected micropollutants — Comparison of sampling rates and extraction efficiency, Microchemical Journal, 2022, 172, 106975.
A. M. S. Ngueabouo, R. F. T. Tagne, D. R. T. Tchuifon, C. G. Fotsop, A. K. Tamo, S. G. Anagho, Strategy for optimizing the synthesis and characterization of activated carbons obtained by chemical activation of coffee husk, Materials Advances, 2022, 3, 8361–8374.
N. Khan, Z. A.Tabasi, J. Liu, B. H. Zhang, Y. Zhao, Recent Advances in Functional Materials for Wastewater Treatment: From Materials to Technological Innovations, Journal of Marine Science and Engineering, 2022, 10, 534.
T. Leiviskä, S. C. R. Santos, Purifying water with plant-based sustainable solutions: Tannin coagulants and sorbents, Groundwater for Sustainable Development, 2023, 23, 101004.
Z. Raji, A. Karim, A.Karam, S. Khalloufi, Adsorption of Heavy Metals: Mechanisms, Kinetics, and Applications of Various Adsorbents in Wastewater Remediation—A Review, Waste, 2023, 1, 775–805.
Z. Gholizadeh, M. Aliannezhadi, M. Ghominejad, F.S. Tehrani, High Specific Surface Area γ-Al2O3 Nanoparticles Synthesized by Facile and Low-cost Co-precipitation Method, Nature, (2022).
M. Osacký, T. Binčík, B. Hudcová, M. Vítková, H. Pálková, P. Hudec, P. Bačík, A. Czímerová, Low-cost zeolite-based sorbents prepared from industrial perlite by-product material for Zn2+ and Ni2+ removal from aqueous solutions: synthesis, properties and sorption efficiency, Heliyon, 2022, 8, e12029.
B. Vriens, B. Plante, N. Seigneur, H. Jamieson, Mine Waste Rock: Insights for Sustainable Hydrogeochemical Management, Minerals, 2020, 10, 728.
M. Hawerroth, E. Pereira, L. N. B. De Almeida, R. J. E. Martins, J. M. T.Pietrobelli, Mining Waste as an Eco-Friendly Adsorbent in the Removal of Industrial Basazol Yellow 5G Dye and Incorporation in Mortars, Processes, 2023, 11, 3349.
B. M.Rakishev, About the metallogeny of Kazakhstan and its significance for the forecast of mineral deposits, Engineering Journal of Satbayev University, 2022, 144, 25–33.
G. Toktar, A. K. Koizhanova, D. R. Magomedov, N. N.Abdyldaev, A. N. Bakraeva, Increased recovery of free fine gold in the leaching process, Complex Use of Mineral Resources, 2022, 322, 51–58.
J. A. Aznar-Sánchez, J. J. García-Gómez, J. F. Velasco-Muñoz, A.Carretero-Gómez, Mining Waste and Its Sustainable Management: Advances in Worldwide Research, Minerals, 2018, 8, 284.
S. F. Zhansetov, M. A. Asanov, Kazakhstan’s Mineral Raw Materials Industry and Its Potential. In CIS Energy and Minerals Development; Dorian, J. P., Minakir, P. A., Borisovich, V. T., Eds.; Springer Netherlands: Dordrecht, 1993; Vol. 25, , pp. 113–125.
L. G. Gerasimova, A. I. Nikolaev, E. S. Shchukina, M. V.Maslova, Y. G. Kiselev, Hybrid Composites Based on Silica and Titanium (IV) Phosphate for Sorbents, Inorganic Materials, 2020, 56, 1167–1173.
A. A. Nayl, A. I. Abd-Elhamid, A. A. Aly, S. Bräse, Recent progress in the applications of silica-based nanoparticles. RSC Advances, 2022, 12, 13706–13726.
J. Sulejmanović, M.Memić, E. Šehović, R. Omanović, S. Begić, M.Pazalja, A.Ajanović, O.Azhar, F. Sher, Synthesis of green nano sorbents for simultaneous preconcentration and recovery of heavy metals from water, Chemosphere, 2022, 296, 133971.
M. Z. A.Zaimee, M. S.Sarjadi, M. L.Rahman, Heavy Metals Removal from Water by Efficient Adsorbents, Water, 2021, 13, 2659.
S. N. Kubekova, V. I.Kapralova, S. A.Telkov, Silicophosphate Sorbents, Based on Ore-Processing Plants’ Waste in Kazakhstan, International Journal of Environmental and Science Education, 2016, 11, 4985–4996.
K.Staszak, M.Regel-Rosocka, Removing Heavy Metals: Cutting-Edge Strategies and Advancements in Biosorption Technology, Materials, 2024, 17, 1155.
N. Sheraz, A. Shah, A.Haleem, F. J. Iftikhar, Comprehensive assessment of carbon-, biomaterial- and inorganic-based adsorbents for the removal of the most hazardous heavy metal ions from wastewater, RSC Advances 2024, 14, 11284–11310.
A.D. Kayode, A.S. Sunday, A. S. Oluyemi. Clay Soil Modification Techniques for the Adsorption of Heavy Metals in Aqueous Medium: A Review. International Journal of Advanced Research in Chemical Science 2019, 6.
S. Gates-Rector, T. Blanton, The Powder Diffraction File: a quality materials characterization database, Powder Diffraction, 2019, 34, 352–360.
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Journal of Chemical Technology and Metallurgy
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
