PRACTICAL ASPECTS OF OBTAINING DEFORMED BLANKS FOR THE PRODUCTION OF BIODEGRADABLE IMPLANTS OF INCREASED QUALITY

Authors

  • Viktor Greshta National University “Zaporozhzhia Polytechnic”
  • Vadim Shalomeev National University “Zaporozhzhia Polytechnic”
  • Svetlana Bovkun National University “Zaporozhzhia Polytechnic”
  • Elena Kulabneva National University “Zaporozhzhia Polytechnic”

DOI:

https://doi.org/10.59957/jctm.v60.i2.2025.4

Keywords:

magnesium alloy, structure, mechanical properties, plastic deformation, implant, bacteriological studies, biodegradation, antimicrobial properties

Abstract

This work investigates the possibility of improving the structure and properties of a cast magnesium alloy in the Mg-Nd-Zr-Ag system due to its plastic deformation. The optimal ones have been selected as modes of plastic deformation of cast blanks for the manufacture of high-quality implants. It has been shown that plastic deformation of the MC10 alloy makes it possible to significantly refine its structure by 10 times and increase the level of its mechanical properties by 3 or 5 times. Bacteriological studies of MC10 alloy blanks have shown its high antimicrobial properties, which makes it a promising material for the manufacture of implants.

Downloads

Published

2025-03-07

Issue

Vol. 60 No. 2 (2025)

Section

Articles

License

Copyright (c) 2025 Journal of Chemical Technology and Metallurgy

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.