MODELLING OF BOILING IN DIFFUSION ABSORPTION REFRIGERATORS FOR CFD ANALYSES

Authors

  • Nina Penkova University of Chemical Technology and Metallurgy
  • Yordan Stoyanov University of Chemical Technology and Metallurgy
  • Kalin Krumov University of Chemical Technology and Metallurgy
  • Ivan Kassabov University of Chemical Technology and Metallurgy
  • Vesselin Iliev University of Chemical Technology and Metallurgy
  • Liliana Zashcova University of Chemical Technology and Metallurgy
  • Darina Dimitrova University of Chemical Technology and Metallurgy

DOI:

https://doi.org/10.59957/jctm.v61.i6.2026.17

Keywords:

binary mixtures, boiling, diffusion absorption refrigerator, CFD, saturation temperature

Abstract

The evaporation of binary mixtures is a complex transport phenomenon, including fluid flow, heat exchange, mass transfer and phase change in multi-component, multi-phase domain. The boiling and buoyancy of the vapor bubbles in the generators of absorption diffusion refrigerators (DAR) lead to the bubble pump effect, which is the main driving force of the absorption cycle. Computational fluid dynamics (CFD) is an advanced approaches to improve the efficiency of DAR’s components. Its implementation for the boiling process requires modelling of the thermodynamical processes of the binary mixtures, which is also open problem, especially at vertical generators with rectifier for separation of the saturated liquid and steam, and absorbent recirculation. This paper presents a conception for CFD simulation of binary mixture boiling in such generators, including a new be-temperature model of the saturation temperature. The models are tested based on an experimentally obtained diffusion absorption cycle of ammonia-water solution and its application is confirmed. 

References

B. C. Von Platen, C. G. Munters, Refrigerator U.S. Patent 1685764, 1928.

J. L. Rodríguez-Muñoz, J. M. Belman-Flores, Review of diffusion–absorption refrigeration technologies, Renewable and sustainable energy reviews, 30 (2014), 145-153.

A. Najjaran, A.A. Harraz, N. Mac Dowell, C.N. Markides, Numerical and experimental investigation of diffusion absorption refrigeration systems for use with low-temperature heat sources, Proc ECOS, 2018, 17-22.

B.J.R. Mungyeko Bisulandu, R. Mansouri, A. Ilinca, Diffusion absorption refrigeration systems: An overview of thermal mechanisms and models, Energies, 16(9), 2023, 3610.

S.C.S. Alcântara, J.Â.P. da Costa, A.A.V. Ochoa, G.D.N.P. Leite, Á.A.S. Lima, H.C.N. Silva, P.S.A. Michima, I.C. da Silveira, A.M. de Araújo Caldas, A. Altamirano,. Critical Review of Advances and Numerical Modeling in Absorbers and Desorbers of Absorption Chillers: CFD Applications, Constraints, and Future Prospects, Energies, 18(2), 2025, 314.

R. Garma, Y. Stiriba, M. Bourouis, A. Bellagi, Numerical investigations of the heating distribution effect on the boiling flow in bubble pumps, International journal of hydrogen energy, 39 (27), 2014, 15256-15260.

S.W. Jo, S.A. Sherif, W. E. Lear, Numerical simulation of saturated flow boiling heat transfer of ammonia/water mixture in bubble pumps for absorption–diffusion refrigerators, Journal of thermal science and engineering applications, 6(1), 201, 2014, 011007.

F. Panahizadeh, M. Hamzehei, M. Farzaneh-Gord, A. Antonio Ochoa Villa, Numerical study on heat and mass transfer behavior of pool boiling in LiBr/H2O absorption chiller generator considering different tube surfaces, Thermal Science, 25 (2B), 2021, 1599.

E.Y. Gürbüz, Detailed thermodynamic analysis of the boiler-bubble pump region of a diffusion absorption refrigeration system: experimental and numerical study, Heat and Mass Transfer, 59 (10), 2023, 1837-1853.

A. Benhmidene, K. Hidouri, B. Chaouachi, S. Gabsi M. Bourouis, Experimental investigation on the flow behaviour in a bubble pump of diffusion absorption refrigeration systems, Case Studies in Thermal Engineering, 8, 2016. 1-9.

Edibon, Practical exercises manual www.edibon.com, 2024.

Y. Stoyanov, N. Penkova, K. Krumov, Performance of diffusion absorption refrigerators at variable power input, In IOP Conference Series: Earth and Environmental Science Vol. 1380 (1), 2024, 012016.

Ansys, Inc., Ansys CFX-Solver Theory Guide (Release 2025 R2), Canonsburg, PA, USA, 2025.

N. Kurul, M. Z. Podowski, Multidimensional effects in forced convection subcooled boilin, Proceedings of the 9th International Heat Transfer Conference, 1, 1990, 21–26.

J. Patek, J. Klomfar, Simple functions for fast calculations of selected thermodynamic properties of the ammonia-water system., International Journal of refrigeration, 18 (4), 1995, 228-234

R. I. Tanner, J. F. Milthorpe, Numerical simulation of the flow of fluids with yield stress, Numer Meth Lami Turb Flow Seattle, 390, 1983, 680-90.

M. Conde-Petit, Thermophysical properties of NH3-H2O solutions for the industrial design of absorption refrigeration equipment. Formulation for industrial use, M. Conde Engineering, 2004.

T. Todorov, Refrigeration equipment, Techniques Sofia, 1977 (in Bulgarian).

T. Todorov, V. Daskalov, Refrigeration exercise manual, Techniques Sofia, 1975 (in Bulgarian).

Downloads

Published

2026-11-01

Issue

Section

Articles