PHYSICO-CHEMICAL ANALYSIS OF QUARTZ SAND AND TECHNOLOGICAL WASTE USED AS A MAIN RAW MATERIAL FOR GLASS PRODUCTION

Authors

  • Khidir A. Adinaev Institute of General and Inorganic Chemistry Academy of Sciences of Uzbekistan
  • Zulayhа R. Kadyrova Institute of General and Inorganic Chemistry Academy of Sciences of Uzbekistan

DOI:

https://doi.org/10.59957/jctm.v59.i3.2024.13

Keywords:

quartz sand, man-made waste, lead concentrate, chemical composition, physical-chemical analysis, X-ray, infrared light, spectrum, scanning electron microscope, differential thermal analysis

Abstract

The composition and structure of Sherobod quartz sand and man-made waste were fully investigated using chemical, scanning electron microscope, X-ray, infrared spectroscopic and differential thermal analysis methods. It was found that the content of lead and manganese oxides in Handiza lead concentrate and manganese waste is 25 - 26 %, respectively, and silicon oxide in Sherabad quartz sand is more than 80 %. According to the results of chemical and physico-chemical analyzes of Sherabad quartz sand and man-made waste, it was found that they can be added as glass components by cleaning them from various additives.

Downloads

Published

2024-05-07

Issue

Vol. 59 No. 3 (2024)

Section

Articles

License

Copyright (c) 2024 Journal of Chemical Technology and Metallurgy

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.