PRODUCTION OF PORTLAND CEMENT CLINKER IN RAW MIXTURES BASED ON MINING AND METALLURGICAL PRODUCTION WASTES

Authors

  • Khikmatula L. Usmanov Institute of General and Inorganic Chemistry Academy of Sciences of Uzbekistan
  • Zulayho R. Kadyrova Institute of General and Inorganic Chemistry Academy of Sciences of Uzbekistan
  • Shokhista M. Niyazova Institute of General and Inorganic Chemistry Academy of Sciences of Uzbekistan
  • Fakhriddin G. Khomidov Institute of General and Inorganic Chemistry Academy of Sciences of Uzbekistan
  • Jumabay B. Najimov Institute of General and Inorganic Chemistry Academy of Sciences of Uzbekistan

DOI:

https://doi.org/10.59957/jctm.v60.i3.2025.12

Keywords:

Portland cement, utilization waste, industrial waste, crystal structure, X-ray phase analysis, mineralogical composition, phase

Abstract

The chemical-analytical and physico-chemical properties of flotation waste generated during the enrichment of lead-zinc ores of the Almalyk MMC, steelmaking slags of Uzmetkombinat JSC, formed after the extraction of residual ferrous compounds and limestones of the Shavazsay deposit for the purpose of polishing Portland cement clinker on their basis, have been studied. As a result of experiments, a real possibility was established of obtaining Portland cement clinker of optimal mineralogical composition based on the studied waste, used as the main component in raw mixtures, under optimal firing temperature conditions.

Downloads

Published

2025-04-30

Issue

Section

Articles