EXPERIMENTAL EVALUATION OF REGENERATED XYLENE SOLVENT FOR PRIMER PRODUCTION USING THE ECO PLUS 122 SYSTEM
DOI:
https://doi.org/10.59957/jctm.v61.i6.2026.13Keywords:
xylene regeneration, contamination severity, thermal distillation, solvent recovery, physicochemical properties, coating performance, alkyd-primer technologyAbstract
Industrial xylene used in alkyd-primer production undergoes progressive degradation during repeated manufacturing cycles, leading to the accumulation of oxidized aromatic fragments, polymerized species, and moisture-related impurities. These changes adversely affect volatility, density, residue content, and, ultimately, coating-film performance. This study investigates the effectiveness of thermal regeneration using the ECO PLUS 122 system as a method to restore degraded xylene to a quality suitable for reuse in alkyd formulations. The feedstock was first classified into five contamination levels (CXL0 - CXL4), and representative high-severity fractions were regenerated and evaluated across seven physicochemical indicators and three coating-performance metrics. A stable vapour-
temperature plateau near 120°C was observed during regeneration, indicating selective evaporation of volatile components while retaining high-molecular-weight residues. Regeneration yield decreased predictably with increasing contamination severity, ranging from 78 % for Low-contamination feedstock to 58 % for Very High-contamination levels. Physicochemical analysis showed substantial restoration of solvent properties: density stabilized at 0.865 - 0.867 g cm⁻³, colour index was reduced to 14 - 19 Pt-Co, residue content returned to 0.08 - 0.12 %, moisture levels remained within 40 - 70 ppm, and volatility deviation was limited to 3 - 6 %. Non-volatile residue values (8 - 16 mg 100 mL⁻¹) confirmed the removal of resinous and polymerized contaminants. Performance testing of alkyd-primer films validated the functional suitability of regenerated xylene. Hardness decreased only slightly from 78 HB (standard) to 73 HB (RXL4), while corrosion loss increased moderately from 12 to 18 mg cm⁻². The drying time remained within 31 - 36 min, compared to 35 min for standard xylene, indicating preserved curing kinetics and evaporation behaviour. Overall, the results demonstrate that thermal regeneration is a reliable, scalable, and environmentally beneficial approach for restoring industrial xylene, reducing solvent waste, and maintaining coating-film performance in alkyd-primer production.
References
Y. Chen, L. Jiang, X. Zhao, S. Linag, M. Yu, W. Liu, S. Peng S. The Research on the Solubility of Decabromodiphenyl Ether based on Recycling of Waste Electronic Plastic by Solvent Process. Procedia Environ. Sci., 31, 2016, 827-831. https://doi.org/10.1016/j.proenv.2016.02.083
Z. Hadzhieva, C. Sinsoysal, A. Boccaccini. In-situ electrophoretic deposition (EPD) and anti-solvent precipitation of tannic acid-loaded zein particles, copper-doped bioactive glass, and sodium carboxymethyl cellulose coatings for orthopedic applications. Prog. Org. Coat., 210, 2026, 109641. https://doi.org/10.1016/j.porgcoat.2025.109641.
D. Azman, W. Daud, M. Patah, Z. Amir, P. Saw. Plastic waste management through liquefaction in hydrogen donating solvents: A review. J. Environ. Manag., 359, 2024, 120961. https://doi.org/10.1016/j.jenvman.2024.120961.
R. Ferreira, A. Ferreira, M. Almeida, M. Oliveira, J. Coutinho, E. Batista. Towards sustainable soybean waste management: Bio-based solvent extraction of isoflavones for food and cosmetic applications. Sep. Purif. Technol., 372, 2025, 133435. https://doi.org/10.1016/j.seppur.2025.133435.
R. Morais, H. Sousa, L. Alves, G. Martins. Emerging trends in the valorization of Brazilian native fruits and nuts: innovative extraction technologies and green solvents for the recovery of lipids and bioactive compounds. TIFS, 164, 2025, 105238. https://doi.org/10.1016/j.tifs.2025.105238.
S. Dhiman, N. Fuloria, A. Ghosh, S. Chaudhary, S. Ahammad, S. Tsushima, N. Kelly, R. Jain. Gallium recovery from red mud: Integration of solvent extraction and siderophore assisted technologies. J. Environ. Manag., 370, 2024, 122374. https://doi.org/10.1016/j.jenvman.2024.122374
C. Guzmán, G. Posadas-Romano, N. Hernández-Espinosa, A. Morales-Dorantes, R. Peña. A new standard water absorption criteria based on solvent retention capacity (SRC) to determine dough mixing properties, viscoelasticity, and bread-making quality. J. Cereal Sci., 66, 2015, 59-65. https://doi.org/10.1016/j.jcs.2015.10.009.
M. Abdel-Monem, M. Walash, A. El-Deen. Multi-criteria sustainability assessment of deep eutectic solvent-based liquid-liquid microextraction for prostate cancer therapeutics: Green, practical, and innovative approach. GAC, 14, 2025, 100294. https://doi.org/10.1016/j.greeac.2025.100294.
Z. Xu, Y. Hou, G. Li. Carbon's dual function in phase transformation and defect repair in FeCoCrNiAlTi high-entropy alloy coating. Carbon, 245, 2025, 120761. https://doi.org/10.1016/j.carbon.2025.120761.
H. Jeon, J. Kim, I. Lee, Y. Oh. Optimizing thermal insulation in thermal barrier coatings with defect-fluorite-structured high-entropy oxides. Ceram. Int., 2025 https://doi.org/10.1016/j.ceramint.2025.11.177.
H. Im, J. Kim. A tandem enzymatic-electro upcycling of waste PET into high-value chemicals: Process development and sustainability assessment for circular economy transition. J. Clean. Prod., 527, 2025, 146696. https://doi.org/10.1016/j.jclepro.2025.146696.
E. Fitriasari, M. Akhtar, D. Hwang, J. Liu. Circular economy of expanded polystyrene waste: Techno-economic and life cycle assessments of chemical recycling processes. J. Clean. Prod., 503, 2025, 145416. https://doi.org/10.1016/j.jclepro.2025.145416.
D. Khobragade, P. Parshuramkar, S. Agrawal, R. Ingale, M. Potbhare. Deciphering the role of plasticizers and solvent systems in hydrophobic polymer coating on hydrophilic core. Heliyon, 10(19), 2024, e37938. https://doi.org/10.1016/j.heliyon.2024.e37938
P. Das, N. Devi. Alkyd resins from Argemone mexicana seed oil: synthesis and characterization for use in anticorrosive coating applications. Int. J. Polym. Anal. Charact., 30(7), 2025, 815-833. https://doi.org/10.1080/1023666X.2025.2504559.
L. Sivakumar, S. Arunagiri, D. Perumal, M. Thiyagarajan, N. Prasanth, R. Suraj, S. Rajadesingu, M. Perumal, R. Rajamohan, P. Punniyakotti. Formulations of chitosan/TiO2/ZnO ternary nanocomposites-based alkyd nanopaint for marine anti-biofouling application. Int. Biodeterior. Biodegrad., 204, 2025, 106136. https://doi.org/10.1016/j.ibiod.2025.106136.
J. Sloop, J. Pierfelice, E. Mutlu, S. Gleason, K. Green, S. Waidyanatha. Development and validation of an analytical method for simultaneous quantitation of individual xylene isomers in blood via headspace gas chromatography–mass spectrometry. Microchem. J., 212, 2025, 113401. https://doi.org/10.1016/j.microc.2025.113401.
C. Zito, B. de Sá, T. Perfecto, D. Volanti. Chemoresistive xylene sensor based on hollow praseodymium oxide nanospheres. Mater. Res. Bull., 179, 2024, 112981. https://doi.org/10.1016/j.materresbull.2024.112981.
P. Chowdhury, T. Chowdhury, P. Das, H. Chowdhury, E. Bontempi, R. Corkish. Green solvents for end-of-life photovoltaic module recycling: Mechanisms, applications, environmental and economic perspectives. Sol. Energy Mater. Sol. Cells, 295, 2026, 113964. https://doi.org/10.1016/j.solmat.2025.113964.
J. Lee, Y. Cho, H. Kang, J. Sa. Magnetic and thermo-responsive imidazolium-based ionic liquids as recoverable and reusable kinetic promoters for CH4 hydrate formation toward solidified natural gas storage. Sep. Purif. Technol., 382(3), 2026, 135943. https://doi.org/10.1016/j.seppur.2025.135943.
V. Moreira, L. Castro, J. Balarini, T. Santos, M. Amaral. Recovering and reusing water, H2SO4, nickel and cobalt from gold mining wastewater using air-gap membrane distillation and solvent extraction. Desalination, 580, 2024, 117525. https://doi.org/10.1016/j.desal.2024.117525.
Z. Wang, Y. Wang, H. He, A. Sytchkova, Z. Shen, M. Protopapa, Y. Zhang, C. Chen, Y. Chen, Y. Lu, Y. Shao, J. Shao. Effect of residual impurities on the behavior and laser-induced damage of oxide coatings exposed to deep space radiation. Opt. Mater., 140, 2023, 113838. https://doi.org/10.1016/j.optmat.2023.113838.
J. Kang, W. Zheng, S. Chen, D. Yang, B. Li, C. Zhang, P. Ming. Decoupling solvents evaporation behavior to reveal the drying mechanism and its effect on microstructure formation of catalyst layer in proton exchange membrane fuel cells. J. Power Sources, 623, 2024, 235269. https://doi.org/10.1016/j.jpowsour.2024.235269.
S. Dengale, O. Ranjan, S. Hussen, B. Krishna, P. Musmade, G. Shenoy, K. Bhat. Preparation and characterization of co-amorphous Ritonavir–Indomethacin systems by solvent evaporation technique: Improved dissolution behavior and physical stability without evidence of intermolecular interactions. Eur. J. of Pharm. Sci., 62, 2014, 57-64. https://doi.org/10.1016/j.ejps.2014.05.015.
S. Mohan, R. Katakojwala. The circular chemistry conceptual framework: A way forward to sustainability in industry 4.0. Curr. Opin. Green Sustain. Chem., 28, 2021, 100434. https://doi.org/10.1016/j.cogsc.2020.100434.
M. Hoque, A. Hannan, P. Haque, S. Tappo. Multi-solvent extraction, quantification and characterisation of tannin from Neltuma juliflora bark: a pathway to sustainable utilisation. Nat. Prod. Res., 2025, https://doi.org/10.1080/14786419.2025.2572037.
X. Li, X. Li, X. Ma, C. Li, H. Cai, H. Zhon, S. Wang. Sustainable high-purity MnSO4·H2O preparation for LiMn2O4 production: Utilizing low-grade manganese carbonate ore via saponification-free solvent extraction. Sep. Purif. Technol., 380(1), 2026, 135270. https://doi.org/10.1016/j.seppur.2025.135270.
L. Ma, Q. Lei, X. Zhang, Y. Hao, G. Lin, L. Liang, G. Li, Q. Liang. Hierarchical SnO2/NiO microflowers via heterojunction engineering for high-sensitive ppb-level xylene detection. Talanta, 298(B), 2026, 128996. https://doi.org/10.1016/j.talanta.2025.128996.
X. Xie, R. Zhou, L. Ren, W. Liu, J. Ji, G. Li, H. Peng. Design and mechanism of a highly anti-carbon Pt/ITQ-1 catalyst for o-xylene catalytic oxidation. Sep. Purif. Technol., 367, 2025, 132949. https://doi.org/10.1016/j.seppur.2025.132949.
V. Koval, D. Miroshnichenko, M. Miroshnychenko, S. Nedbailo. Segregation of coal particles during charging into coking tower. J. Chem. Technol. Metall., 60 (6), 2025, 1069-1082. https://doi.org/10.59957/jctm.v60.i6.2025.19.
D. Miroshnichenko, A. Bannikov, L. Bannikov, S. Nesterenko. Influence of phenolic compounds on the operational characteristics of coal tar wash oil. J. Chem. Technol. Metall., 60 (1), 2025, 103-112. https://doi.org/10.59957/jctm.v60.i1.2025.10.
L. Bannikov, D. Miroshnichenko, A. Bannikov, O. Borisenko, V. Tertychnyi. Dephenolization of coal tar heavy fractions:a reagent - free method for phenol recovery. J. Chem. Technol. Metall., 60 (3), 2025, 471-480. https://doi.org/10.59957/jctm.v60.i3.2025.13.
D. Miroshnichenko, L. Bannikov, A. Bannikov, S. Nesterenko, F. Cheshko, S. Kravchenko. Absorption oil for coke oven gas purification. J. Chem. Technol. Metall., 60 (1), 2025, 95-102. https://doi.org/10.59957/jctm.v60.i1.2025.9.
M. Zhylina, A. Shishkin, D. Miroshnichenko, V. Sterna, J. Ozolins, L. Ansone-Bertina, M. Klavins, G. Goel, S. Goel. Granulation and pyrolysis of agricultural residues for an enhanced circular economy. Results Eng., 26, 2025, 104919. https://doi.org/10.1016/j.rineng.2025.104919.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Journal of Chemical Technology and Metallurgy
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
